Loading ...
Loading ...
Loading ...
Control Panel
Cleaning and maintenance
Particular care must be taken with the aluminium filters which must be periodically cleaned (at least every
two months). Remove the grease filters and wash them either by hand using hot soapy water or in the
dishwasher using mild detergent.
Note- some discolouration of the frame may occur when washing in the dishwasher
Caution: Never use abrasive or oil based liquid cleaners.
To clean the stainless steel and glass components of the appliance use mild detergent and warm water. In
areas of high humidity and coastal environments cleaning should be carried out frequently.
LED bulb replacement (complete assembly required)
1. Switch off the power to the canopy hood and allow the bulb to cool.
2. Remove the filters and pop out complete assembly – See A & B
3 Replace led light assembly by attaching the wiring clips –See C
5. Push the light assembly back into place – See A
Optional accessories:
For other accessories, parts and service, please contact your local supplier (Refer to the Warranty
Certificate).
1. Plug the Rangehood to power.
2. Push the first button (low speed) the motor runs at
low speed. Push it again and the motor will stop.
3. Push the middle button, and the motor runs at mid
speed. Push it again and the motor will stop
4. Push the high button and motor runs on high
speed. Push it again and the motor will stop
5. Push the light button; four LED lamps will come
on. Push it again and the lamps will turn off.
Part number
code
Description
2620
Charcoal Filter RIE (3 per pack)
2205
Chimney Extension 10' Set RIE3CL9SS includes:
- 1pc 10ft Ext Chimney Top 1000mm
- 1pc 10ft Ext Top Chimney Install Brackets 1000mm
- 1pc Chimney Bottom 600mm
A
B
C
Loading ...
Loading ...
Loading ...