Loading ...
satellite signals and its communication service to get the location. But the GPS on M1 can
only rely on the satellite signal. So that’s the reason why need it to locate at an open space.
** You need to sync the GPS data at first, then you can view your riding route on the App.
You can find the tutorial for "how to view GPS route" on the Amazon product page, just
below this installation tutorial.
7. Get power supply via the Voltage Converter or the USB cable
Just need to remember that the red cable on the converter should connect to the V+, and
the black cable on the converter should connect to the V-.
And please make sure the motorcycle battery voltage is within 11.7V-30V if you use the
converter for power supply.
The converter has the “low voltage protection” feature which will cut off the power supply if
the voltage is lower than 11.7V, to avoid the motorcycle battery from being exhausted.
If the voltage is higher than 30V, the converter will be damaged.
If you power the camera using the USB power source on your motorcycle, please make sure
the USB power source can output at least 5V/1A. Since some type of USB power can only
output 5V/500mA, which is not enough for the camera.
8. Finally, connect all the wires to the DVR.
Please fix the DVR at a stable place where has enough space for it, to avoid it from been
crashed.
9. Now the installation is finished, just go for a test run!
Please always remember to contact us at any time for any questions via Amazon
message!