Loading ...
Loading ...
Loading ...
EN-8
Use / Cleaning and care
Tips for using your blender
• For best results, cut the food to be
blended into cubes.
• Do not use the PULSE function for more
than 5 seconds at a time. You might need
to stop operation to push the ingredients
down the sides of the blender jug with a
spatula.
• When blending together liquid and dry
ingredients, blend liquids first and then
add the dry ingredients
• Remove any hard parts from foods to be
blended (e.g. cores or stones from fruit,
bones from meat etc.).
• Do not allow food residues to dry inside
the jug and blades for too long, as they
could become very difficult to remove. If
you cannot clean it right away, pour a
little warm water and let it soak.
• Do not process hot food. Let it cool to
room temperature before blending.
4 Cleaning and care
Improper use. Danger of
electrocution
• Make sure the blender is
unplugged before fitting or
removing the blade assembly.
Improper use. Risk of damage
to surfaces.
• Do not use steam jets to clean
the appliance.
• Do not use cleaning products
containing chlorine, ammonia
or bleach on parts with metallic
finishes (e.g. anodised, nickel-
or chrome-plated).
• Do not use abrasive or corrosive
detergents (e.g. powder
products, stain removers and
metallic scourers).
• Do not use rough or abrasive
materials or sharp metal
scrapers.
4.1 Cleaning the motor base
To keep the outer surface of the blender
motor base in good condition, it should
be cleaned regularly after use. Let the
appliance cool down first. Use a damp and
soft cloth with mild detergent.
Loading ...
Loading ...
Loading ...