Loading ...
Loading ...
Loading ...
Remove packing tape from brewer.
Pull plug and extend cord from cord
storage located at the back of the
brewer. Plug into a grounded outlet.
Press the power button. The power
button will illuminate.
Add 1 cup (8oz) of water into
a mug. Lift the water reservoir
lid and pour the water into the
reservoir. Do not fill past the
MAX or below the MIN fill lines.
Lower the lid and place your mug
on the drip tray.
NOTE: Do not use distilled water.
Lift and lower the handle. Do not
insert a K-Cup® pod. The brew
indicator light will flash to indicate
that the brewer is ready.
Press the brew button. The brew
indicator light will illuminate solid,
then begin to pulse while the
brewer is heating. After about 2
minutes, the brew indicator light will
illuminate solid again and the water
will begin to dispense. Pour the hot
water into the sink.
The one-time setup process is now
complete and you are ready to brew!
1
3
2
4
Before You Brew
Brew Button
Plug & Power Fill & Place
Lift & Lower
Cleansing Brew
5
6
Add desired amount of water into a
mug (6oz minimum, 8oz maximum).
Lift the water reservoir lid and pour
the water into the reservoir. Do not
fill past the MAX or below the MIN
fill lines. Lower the lid and place
your mug on the drip tray.
Lift the handle. Place a K-Cup®
pod in the K-Cup® pod holder.
Lower the handle completely to
close the lid. The brew indicator
light will flash to indicate that the
brewer is ready. Do not remove
the foil lid on the K-Cup® pod.
High Altitude Brewing: While holding
the brewer handle up, push down
slowly on the K-Cup® pod in the pod
holder until the bottom of the K-Cup®
pod is punctured by the exit needle.
STRONG
Fill & Place Mug
7
Press the brew button. The brew
indicator light will illuminate solid,
then begin to pulse while the
brewer is heating. After about 2
minutes, the brew indicator light
will illuminate solid again and the
beverage will begin to dispense.
Brewing is complete when the
brew indicator light is no longer
illuminated. When complete, lift the
handle and dispose of the used K-Cup® pod.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To
avoid injury, do not lift the handle during the brewing process.
Brew Button
Brew & Enjoy!
Lift & Place Pod
Brewer Features
Auto Off: Automatically turns your brewer off 90 seconds after the last
brew for energy savings.
Cord Storage: Makes transporting your brewer convenient and keeps
countertops tidy.
Travel Mug Friendly: Remove the drip tray to accomodate a travel mug.
Brew Your First Cup
Loading ...
Loading ...
Loading ...