Loading ...
Loading ...
Loading ...
8 49-80565-5
Care and Cleaning
Custom Hood Insert
Stainless
steel hood
surfaces
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain. Follow the cleaner instructions for
cleaning the stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call
our toll-free number:
Monogram Preferred Service: 800.444.1845
Monogram.com
Light bulbs
To change the light bulbs:
1. Grasp the outer trim ring and twist until
reaching the unlock position. Then pull the
ring straight out.
2. Grasp the bulb and twist until reaching the
unlock position. Then gently pull the bulb
straight out.
3. Replace with the same wattage, type and
size bulb. Wear gloves. Do not touch bulb
with your bare fingers.
These 120 volt, 50 watt halogen bulbs with a
GU10 base are available at specialty lighting
stores and home building centers.
4. Replace the outer trim ring by inserting the
two retaining tabs into the two tab slots,
pressing the ring flush with the surface of
the hood insert and twisting until reaching
the lock position.
Loading ...
Loading ...
Loading ...