Loading ...
Loading ...
Loading ...
49-80565-5 7
For your
safety
Before servicing or cleaning the unit, switch
power off at the service panel and lock the
service panel to prevent power from being
switched on accidentally. If the service panel
cannot be locked, fasten a tag or prominent
warning label to the panel.
Care and Cleaning
Custom Hood Insert
Metal grease
filters
The metal filters trap grease released by foods
on the cooktop. The filters also help prevent
flames (from food, grease) from damaging the
inside of the hood.
For this reason, the filters must ALWAYS be
in place when the hood is used. The grease
filters should be cleaned every 6 months, or
as needed.
To remove:
Support the filter with one hand while pulling
down filter clip with the other. Pull the filter
down and out.
To replace:
1. Tip the filter into the back tab slots and lift up.
2. While maintaining slight upward pressure
on filter, open clip and press into place with
two hands.
To clean, swish the filter in hot soapy water
and rinse in clean water or wash it in the
dishwasher. Do not use abrasive cleansers.
Clip
Clip
Loading ...
Loading ...
Loading ...