Loading ...
Loading ...
Loading ...
Tabs
Fig. 1
ASSEMBLING UNIT AS A VACUUM
Vacuum Tube Assembly
_ll ARNING: To prevent serious personal injury,
stop the engine and allow the impeller to stop
before installingor changing tubes.
A
WARNING: To prevent serious personal injury
or damage to the unit, always install vacuum
tubes, vacuum bag and make sure the vacuum
bag is completely zipped closed when operating
this unit as a vacuum.
NOTE: If the unit was assembled as a blower unit,
remove all blower parts and store away in a secure place
for later use.
Installing
1, Assemble the vacuum tube by installingthe lower
tube intothe upper tube with the tab on the lower
tube aligning with the notchon the upper tube. Push
the lower tube down and snap intoplace (Fig, 2)
2, Turn the unitover and open the vacuum door by
pressing the tab button and swinging the door open
(Fig. 3).
3. Install the upper vacuum tube by hooking under the
hinge of the vacuum door and positioning the tube to
where the knob threads align with the tapped hole
(Figs 4 & 5).
4. Tighten the knob securely. The tube should set even
with the bottom of the unit. Do not over tighten.
Notch
Tab
Upper Vac Tube
Fig. 2
Tab Button
Fig. 3
Fig. 4
Knob
Fig, 5
-7-
Loading ...
Loading ...
Loading ...