Loading ...
Loading ...
Loading ...
Installation
29
For air extraction mode
If your ducting system does not have a
non-return flap, two are supplied with
the cooker hood. One for 150mm
and one for 120mm ducting.
For 150mm ducting fit the non-
return flap into the ducting
connection.
For 120mm ducting fit the
reducing collar supplied onto the
ducting connection and then fit the
appropriate non-return flap onto the
reducing collar.
Attach the exhaust ducting, e.g.
flexible hose, to the exhaust socket
using a hose clip (available as an
optional accessory).
See “Connection for air extraction”
for further instructions on fitting the
ducting.
For recirculation mode
Fit the charcoal filters (see “Cleaning
and care”).
Electrical connection
Refer to the notes in “Electrical
connection” and “Warning and
Safety instructions” before
connecting to the electricity supply.
Connect the cooker hood to the
electricity supply.
Take the grease filters out and pull
the protective foil off the filter frame.
Then replace the grease filter.
Loading ...
Loading ...
Loading ...