Loading ...
Loading ...
Loading ...
USING THE REMOTE TO CONTROL VCR FUNCTIONS
Operating the precoded function for your VCR.
This remote is designed to operate different types of VCRs.
VCR. (Refer to page 30.)
1. Set the MULTI-PAGE select switch to VCR,
2.
3.
4.
5.
You must first program the remote to match the remote system of your
Turn ON your VCFt.
Aim the remote control at the front of your VCR.
Hold down the PROG button on the remote, enter the two digit preset code that matches your VCR as shown in page :30. The
remote will turn off your VCR when the correct two digit preset code is entered. When this occurs, the remote control is pro-
gran'tmed for your VCR. If the VCR does not turn off after five seconds, try a different two digit preset code.
The remote will now control your VCR.
NOTES:
1. If your VCR cannot be operated after performing the
above procedures, your VCR's code has not been
pr_<:oded into the remote.
2. In the unlikely event that your VCR cannot be operated
after performing the above procedures, please consult
your VCR operating guide.
3. The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
4. If your VCR does not have a power function, the remote
will issue the CHANNEL UP function.
5. The MENU button will act as the VCR MENU button for
HrTACHI VCRs.
6. The LST-CH button will act as your VCR ENTER button if
required.
7. The SLEEP button will act as your VCR '100' button if
required.
8. The REC button must be pressed two times to begin VCR
recording. This button will also act as the VCR record
button when the remote is in CABLE or DSS mode.
PRECODED VCR buttons
These buttons transmit the chosen preceded VCR codes.
EXCLUSIVE TV buttons
These buttons are for operating the TV.
AUDIO O
SVCS SCHED
HITACHI
OLL_612MP
J
®
Q
@
®
@
27
Loading ...
Loading ...
Loading ...