Loading ...
Loading ...
Loading ...
Not Cooling
Evakool Trouble Shooting Flow Chart
1 Flash every 4 seconds
Low Voltage
* Try on different power source (vehicle or 240
volt adapter). If changing power source fixed
issue, then possible issue with original power
source.
* New cigarette lead
2 Flashes every 4 seconds
Fan Issue
Fan is drawing too many amps (over 0.5 amps),
replace fan.
4 Flashes every 4 seconds
Low Motor Speed
* Set to LOW SPEED
* Reduce products / items inside unit
* Move so unit is in a lower ambient temperature
Clean vents / ensure clear air flow over compressor
* Fan fault
3 Flashes every 4 seconds
Compressor Start Issue
* Unplug cigarette cable and allow unit to rest for
15 minutes.
* Set to LOW SPEED
* Try on different power source (vehicle or 240
volt adapter).
* Electronic box fault
* Compressor fault
Compressor
and fan running
Compressor
running, no fan
Display not lit / on.
Yellow fault
light flashing
5 Flashes every 4 seconds
Over Temperature
* Ambient temperature too high
* Clean vents / ensure clear air flow over compres-
sor
* Fan fault
Make sure vents
and condenser are
not blocked and
there is clear air
flow through the
unit
Possible gas
issue.
Contact Evakool
or service agent.
Clean condenser
and vents with
brush, vacuum or
compressed air.
Make sure not to
flatten the fins.
Faulty fan.
Replace Fan
Partial Display
missing
Faulty display
circuit board.
Try on different power source
(vehicle or 240 volt adapter).
If changing power source fixed
issue, then possible issue with
original power source.
Fan running,
no compressor
no Fault LED
Faulty yellow
Fault LED
Electronic Box
Loose wires on top dis-
play circuit board or
bottom circuit board.
Faulty top display or
bottom circuit board.
Electronic Box
If the below options do not help, you are
unable to follow them or unable to com-
plete the steps please contact Evakool or
a service agent for further help.
Valid for Evakool RF, ED and
GFM models fitted with digital
controls from 2015.
This flow chart details the order in which
the various procedures / tests need to be
followed in order to diagnose the reason
for the fridge’s malfunction.
Loading ...