Loading ...
Loading ...
Loading ...
Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below•
STOP CLEAR PAD-- Used to clear any
function previously entered except the time of
day and minute timer. Press STOP CLEAR to
stop cooking. Also the STOP CLEAR pad is
used to activate oven lockout setting.
\
SAKE PAD--Used
to select the bake
function.
BROIL PAD-- Used
to select the variable
broil function.
® ®
J
SELECT CLEAN PAD
Used to select the Self-
Cleaning cycle. A 2 or 3
hours Self-Clean time
may be selected.
UP and DOWN ARROWS PADS Used along CLOCK SET
with the function pads to select oven temperature, PAD Used to
cook time, start time (when programming an set the time of
automatic start time), time of day, clean time and day.
minute timer. / /
® Oven
O Preheat
OoerLecked
OVEN, PREHEAT & DOOR LOCK LIGHTS* The "Oven" light will glow
each time the oven unit turns on to maintain the set oven temperature.
The "Preheat" light will glow when the oven is first set to operate, or if
the desired temperature is reset higher than the actual oven temperature.
The "Door Locked" light will flash until the door locks when the self-
clean cycle is in use. it glows constantly after the door locks.
®
ils,op••
Time
FEATURE iNDiCATOR
LIGHTS-- These light
to show which feature is
in use.
COOK TiME PAD
Used to enter the
Jlength of the baking
time.
STOP TiME PAD
Used to set the
desired stop time
for baking. May be
used with COOK
- TIME to program a
delayed bake
cycle.
TIMER SET/OFF PAD Used to
set or cancel the minute timer.
The minute timer does not start
or stop cooking. Also, TIMER
SET/OFF Pad is used to set the
Continuous Bake Feature.
*Note:The OVEN indicator light Onthe electionic display will tUrn ON and OFF when using the Bake feature and during
preheat. Thisis normal and indicates that the oven is cycling to maintain the selected baking temperaturel When the
preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed• If desired, the control can be programmed
hold .........After 7 seconds, the control will beep once• This will block the controls from
for silent operation• Press and
sounding when a pad is pressed• To return the sound, press and hold again for 7 seconds until the control beeps
once.
Note: The control will return to the audible mode after a power outage•
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory• The oven can be
programmed for any temperature from 170 °F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1 Press "-- --" appears in the display.
2. Press and hold the A until "HI" appears in the display,
3. Press and hold until °F or appears in the display,
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode,
Loading ...
Loading ...
Loading ...