Loading ...
Loading ...
Loading ...
REVERSE REFRIGERATOR DOOR
Before reversing the door, remove the Base Grille.
See BASE GRILLE INSTALLATION for reference
• Remove the cover on the left side of base grille and
)lace it on the right side.
Le_ cover
Right cover
H
' li
Fig. 25 "_..........
Locate the quick connector next to the Bottom Hinge
and disassemble with the next steps:
1. Remove locking clipQ and set aside.
2. Press back collet and pull out water connection tube (::Z).
Fig. 26
bottom hinge
_._-
Collet
Tube
Insert lines
Locking clip I
• Carefully disconnect wire harness connectors next to
Bottom Hinge.
As described in REMOVE REFRIGERATOR DOOR.
13
Using an adjustable wrench remove Bottom Nut.
As described in REMOVE REFRIGERATOR DOOR.
Insert flat blade screwdriver into corner notches on
bottom of dispenser cover. Pry base off cover loose.
CAREFULLY pull cover forward to detach clips on
sides and top of cover, and disconnect the wire
connector on the back of the dispenser cover.
Set cover aside.
Fig. 27
Use phillips screwdriver to remove tube guide screw.
Pull tube all the way up and out of door. Set tube aside.
left channel rtgn_ channel -_
Fig. 28
18
_tube guide
screw
b-4
, Using a 1/4" socket wrench, loosen and remove
hinge pin from the middle hinge pin bracket.
Remove washer underneath the middle hinge and
set aside.
Fig. 29
• Lift up the door watching carefully that wire harness
doesn't get damaged by the Hinge Pin.
Fig. 30
Loading ...
Loading ...
Loading ...