Loading ...
Loading ...
Loading ...
-- u
SERVICE ADJUSTMENTS
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
Q
o
e
o
Depress cfutchlbrake pedal fully and set parking brake.
Place motion control lever in neutral (N) position.
Place attachment clutch in "DISENGAGED" position,
Turn ignition key "OFF" and remove key.
Make sure the blades and all moving parts have completely stopped,
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plug.
TRACTOR
TO REMOVE MOWER (See Fig, 20)
Mower will be easier to remove from the rightside of tractor.
- Place attachment clutch in "DISENGAGED" position.
= Move attachment lift lever forward to lower mower to its
Iowest eosition.
= Roll belt off engine pulley,
• Disconnect dutch rod from clutch lever by removing
retainer spring.
= Disconnect anti-sway bar from chassis bracket by
removing retainer spring.
• Disconnect suspension arms from rear deck brackets
oy removing retainer springs.
• Disconnect front links from deck by removing retainer
springs,
- Raise lift lever to raise suspension arms, Sride mower
out from under tractor.
IMPORTANT: IF AN ATTACHMENT OTHER THAN THE
MOWER IS TO BE MOUNTED TO THE TRACTOR.
REMOVE THE FRONT LINKS:
TO INSTALL MOWER (See Fig. 20)
o Raise attachment Iift Fever to its highest position.
• Slide mower under tractor with discharge guard to right
side of tractor.
* Lower lift Iever to its lowest position.
, Install mower in reverse order of removal instructions,
CLUTCH ROD_
CLUTCH LEVER
"_?_/, RETAINER
SPRING
ENGINE
FRONT
LINK
'_"_ RETAINER
SPRINGS
(BOTH
\ 4\ SIDES)
RETAINER
SPRING /
ANTi-SWAY BAR
- " /__E::_[
/
t
RETAINER
SPRINGS
(BOTH SIDES)
FiG. 20
19
Loading ...
Loading ...
Loading ...