Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
53
Installing several
SmartLine elements
The gaps between the individual Smart-
Line elements are sealed with a silicone
sealant that is heat-resistant to at least
160°C. With flush-fit installation, the
gap between the SmartLine element(s)
and the worktop must also be sealed
with a silicone sealant that is heat-res-
istant to at least 160°C.
After installation, the SmartLine ele-
ments must be easily accessible from
below, so that the bottom half of the
casing can be removed for mainten-
ance. If the SmartLine elements are not
accessible from below, the sealant must
be removed so that they can be re-
moved.
Worktop depth
The downdraft extractor can be in-
stalled with the connector for the air
duct on either the right or the left-hand
side.
Minimum worktop depth for
- Right connector 600mm
- Left connector 665mm
Loading ...
Loading ...
Loading ...