Loading ...
Loading ...
Loading ...
OPTIONS- STYLES 2 AND 3
'_ _E - . C _ .. / . _ _ + "
The OPTIONS selection pad allows you to access special
functions within the Electronic Oven Control that allow you to
customize the product to your needs. These special functions
allow you to change the oven temperature between Fahrenheit
and Celsius, turn the audible signals and prompts on and, off and
adjust the oven calibration. The Sabbath Mode is also set using
the OPTIONS selection pad.
To Use: Press OPTIONS and number pad to quickly access
desired hidden function.
OPTIONS SPECIAL FUNCTION
1 Sets Fahrenheit
Sets Celsius
Sets Tones On
Sets Tones Off
7
8
9
0
Cooking Time Completion Tones On
Cooking Time Completion Tones Off
Oven Temperature Calibration
Sabbath Mode
I J< t
II ilIII"(#I'II i :_I[/IIii
Press options, then 1 on the keypad for Fahrenheit. Press
options, then 2 on the keypad for Celsius.
Preheat Completion Tone
One beep indicates a preheat cycle has been completed.
All Tones
All tones are preset ON, but can be turned OFE To turn tones ON,
press the options key, then press keypad 3. To turn tones OFF,
press the options key again, and then press keypad 4.
Tone Volume
The volume is preset at high, but can be changed to low.
To Change: Press and hold COOK DURATION for 5 seconds to
raise the volume. Repeat to lower the volume.
IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door during cycling may
give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a sign means the oven will be warmer by
the displayed amount. Use the following chart as a guide.
ADJUSTMENT °F COOKS FOOD
(AUTOMATIC °C CHANGE)
10°F (5°C) ...a little more
Tones are audible signals, indicating the following:
One beep
• Function has been entered
Three beeps
• Invalid pad press
Timer Completion Tones
Four beeps occur when the timer reaches zero. This can be when
using the timer for functions other than cooking.
Cooking Time Completion Tones
Four beeps indicate the end of a cooking cycle.
To turn On/Off: Press OPTIONS, and then 7 to turn ON. Press
OPTIONS, and then 8 to turn OFE
20°F (10°C) ...moderately more
35°F (15°C) ...much more
-10°F (-5°C) ...a little less
-20°F (-10°C) ...moderately less
-35°F (-15°C) ...much less
To Adjust Oven Temperature Calibration:
1. Press OPTIONS, and then 9 to set the calibration.
2. Press 3 to increase the temperature, or press 6 to decrease
the temperature.
3. Press START to end calibration.
13
Loading ...
Loading ...
Loading ...