Loading ...
Loading ...
Loading ...
Making cellular calls
Important:
R The unit cannot be used to talk on 2 cellular
lines at the same time.
R Only 1 Bluetooth device can be used with
the unit at a time
*1
.
R Before making calls, confirm that the
corresponding
on the handset is
displayed (page 16).
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
1 Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
2 MCELLN
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 23).
Go to step 4.
3 M
bN: Select the desired cellular phone. a
MSELECTN
4 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R To switch to the speaker, press M
ZN.
To switch back to the receiver, press MZN/
M
N.
R In step 1, you can store the dialed phone
number to the phonebook by pressing and
holding M
FN W for a few seconds.
Adjusting the receiver or speaker
volume
Press M
DN or MCN repeatedly while talking.
Note:
R The receiver
*1
or speaker volume you set is
kept for each line (landline and cellular
lines).
*1 If the receiver volume is set to level 5
(max.), it will be changed to level 4 in the
next call.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (48 digits max. each).
1 M
EN REDIAL
2 M
bN: Select the desired entry.
3 MCELLN
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 23).
4 M
bN: Select the desired cellular phone. a
MSELECTN
Erasing a number in the redial list
n When a cellular phone is paired:
1 M
EN REDIAL
2 M
bN: Select the desired entry. a
MMENUN
3 M
bN: “Erase” a MSELECTN
4 M
bN: “Yes” a MSELECTN a MOFFN
n When a cellular phone is not paired:
1 M
EN REDIAL
2 M
bN: Select the desired entry. a
MERASEN
3 M
bN: “Yes” a MSELECTN a MOFFN
Making landline calls
1 Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
2 Press M
N to make the call.
R To make the call using the
speakerphone, press M
ZN.
3 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R To switch to the speaker, press M
ZN.
To switch back to the receiver, press M
ZN/
M
N.
24
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Handset
Loading ...
Loading ...
Loading ...