Loading ...
Loading ...
Loading ...
INSTALLATION
Gas Information
During a power failure the burners will not light automatically. In an emergency, a cooktop burner
may be lit with a match by following the steps below.
WARNING: Lighting gas burners with a match is dangerous. You should match light the cooktop
burners only in an emergency. On models equipped, check to be sure the cooktop is in the
UNLOCKED position.
1. Light a match and hold the flame near the burner you want to light. Wooden matches work
best.
2.
2. Push in and turn the control knob slowly. Be sure you are turning the correct knob for the
burner you are lighting.
NOTE: If the burner does not light within five seconds, turn the knob off, and wait one minute
before trying again.
The Burner Flames
T
Turn each burner on. Flames should be blue in color with no trace of yellow (yellow tips on outer
cones normal for LP gas). The burner flames should not flutter or blow away from the burner. The
flame should be no less than 1 /4" on the lowest setting and no greater than 1-1/2" on highest
setting.
WARNING: If you attempt to measure the flame, please use caution. Risk of burn may occur.
Loading ...
Loading ...
Loading ...