Loading ...
Loading ...
Loading ...
Setting Oven Controls
The CLOCK J_ pad is used to set the clock. The clock may be set for 12 or 24 hour time
of day operation. The clock has been preset at the factory for the 12 hour operation. When
the range is first plugged in, or when the power supply to the range has been interrupted,
the timer in the display will flash.
iNSTRUCTiONS
To set the dock (example below for 1:30)
1. Press ('-J_. "CLO" wi[[ appear in the
display (Figure 2).
2. Press pads to set the time of day to 1:30 (Figure
3).
"CLO" will stay in the display. Press (ST_). "CLO" will
disappear and the clock will start (Figure 4).
Changing between 12 or 24 hour time of day display
• Press and hold for 7 seconds "CLO" will appear in the
display. 12h (Figure 5) or 24h (Figure 6) appears in the
display and the control beeps once•
2. Press to switch between the 12 and 24 hour time of day
display. The display will show either "12h" (Figure 5) or "24h"
(Figure 6).
3. Press _T_R_to accept the change or press _ST_O_to reject the
change-.--I
W
4. Reset the correct time as described in To set the Clock above•
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours•
PRESS
®
:e
@
(_for 7 seconds
Figure 1
DISPLAY
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
13
Loading ...
Loading ...
Loading ...