Loading ...
Loading ...
Loading ...
Review this table to find do-it-yourself solutions for minor performance problems. Any other
service needed should be performed by a Sears or other qualified service agent.
WARNING
Always turn off and unplug vacuum cleaner before performing maintenance to the
vacuum cleaner. Fallure to do so could result in electrical shock or personal injury.
VacuumcJeanerwon'tstart.
Poorjobof dirt
pick-up.
Vacuumcleanerstartsbut
shutsoff.
PowerMate®will not
runwhen attached.
Vacuumcleanerpicksup
moveableruqs=or.
PowerMate_pushestoo hard.
Lightwon'twork.
Cordwon't rewind.
Vacuumcleanerleavesmarks
oncarpet.
1. Unpluggedatwall outbt.
2. Trippedcircuitbreaker/blownfuse
at householdservicepanel
3. Loosehoseelectricalconnections.
1. Fullor doggeddustbag.
2. Cloggedairflowpassages.
3. Dirtyfilters.
4. Wrongpileheightsetting.
5. Suctioncontrolis open.
6. Holeinhose.
Z WornPowerMate®agitator.
8. Wornorbrokenbelt.
9. Dirtyagitatororendcaps.
10. Canisterhoodopen.
1. Hoseor hood electrical connections.
2, Trippedoverload protector in
PowerMate®.
3, Trippedthermalprotector
in canister,
1. PowerMate®connections
unplugged.
2. Wornorbrokenbelt.
3, Dirtyagitatororendcaps,
4. Trippedoverloadprotectorin
PowerMate_.
1. Pluginfirmly,pushON/OFFswitchto ON.
2. Resetcircuitbreakerorreplacefuse.
3. Reconnecthoseends.
]. Changebag page15).
2. Clearairflowpassages(page14).
3. Changefilters(page16.
4. Adjustsetting(page14).
5. Adjustcontrol(page13).
6. Replacehose.
Z Changeagitator(page19).
8& 9. SeeBELTCHANGINGANDAGITATOR
CLEANINGpage17-18.
10. Coseandlatchhood.
1. Checkconnections,reconnecthoseends.
2. Removeanyitemsthatmaybecaught
orjammed,thenreset.If vacuumcleanerstarts
andstopsagain,cleanagitatorandendcaps,
thenreset.
3. Resetthermalprotector(page13).
1,
2&3,
4.
Pluginfirmly.
SeeBELTCHANGINGAND AGITATOR
CLEANING(page 17-18).
Removeany itemsthat may be caught
orjammed, then reset, if vacuumcleaner starts
and stopsagain, clean agitator and end caps,
then reset.
Moveswitch to CARPETposition.5, Switchnot in CARPETposition. 5,
1, Wrong pile height setting. 1. Adjust setting(page 14),
2, Suctiontoo strong. 2, Open suctioncontrol (page 13).
1. Burnedout light bulb. 1. Changelight bulb (page 18),
2. Trippedoverload protector in 2. Removeanyitems that may be caught
PowerMate(R). orjammed, then reset. If vacuumcleaner starts
and stopsagain, clean agitator and end caps,
then reset.
1. Dirty power cord. 1. Cleanthe power cord.
2. Cord jammed. 2. Pullout cord and rewind.
1. Wrong vacuumingpattern. 1. SeeVACUUMINGTIPS(page 10).
- 20 -
Loading ...
Loading ...
Loading ...