Loading ...
Loading ...
Loading ...
8
INITIAL INSTALLATION
4. Loosen all four preassembled mounting bracket
screws (G), then completely remove the two
mounting bracket screws (G) from the round holes
of canopy (E). Set aside for later use. Turn the
canopy in a counterclockwise direction. Detach
mounting bracket (D) from canopy (E).
Attach mounting bracket (D) to outlet box (not
included) using screws and washers provided with the
outlet box.
WARNING: It is very important to use the proper
hardware when installing the mounting bracket (D) as
this will support the fan.
5. Remove the 10 preassembled motor screws (J)
from the underside of the motor assembly (I). Save
motor screws (J) for blade arm (Q) attachment.
6. Remove the downrod clip (C) and downrod pin (B)
from the downrod (A). Then partially loosen the
set screws (H) in the yoke at the top of the motor
assembly (I).
5
6
E
I
D
J
G
C
B
I
A
H
4
Loading ...
Loading ...
Loading ...