Loading ...
Loading ...
Loading ...
LIMBING
• Limb a tree only after it is cut down.
• Leave the larger limbs underneath the
felled tree to support the tree as you
work.
• Start at the base of the felled tree and
work toward the top, cutting branches
and limbs. Remove small limbs with
one cut.
• Keep the tree between you and the
chain.
• Remove larger, supporting branches
with the 1/3, 2/3 cutting techniques de-
scribed in the bucking section.
• Always use an overcut to cut small
and freely hanging limbs. Undercut-
ting could cause limbs to fall and
pinch the saw.
PRUNING
WARNING: Limit pruning to limbs
shoulder height or below. Do not cut if
CUSTOMER RESPONSIBILITIES
branches are higher than your shoul-
der. Get a professional to do the job.
• Make your first cut 1/3 of the way
through the bottom of the limb.
• Next make a second cut all the way
through the limb.
• Finish the pruning operation by using
an overcut so that the stump of the
limb protrudes 1 to 2 inches from the
trunk of the tree.
ISecond_
Firstcut
1/3 of way
3rd cut I to 2 in.
from trunk of tree
Fill in dates as you complete Before After Every EveryIYearly
regular service Use Use 5 hrs. 25 hrs_
Check for damaged/worn parts v"
Check for loose fasteners/parts _,
Check chain tension P"
Check chain sharpness P"
Check guide bar
Clean unit & labels _,,
Clean airfilter _,
Clean/inspect spark arrestor
screen & inspect muffler P"
Replace spark plug _'
Service
Dates
GENERAL RECOMMENDATIONS
The warranty on this unit does not cov-
er items that have been subjected to
operator abuse or negligence. To re-
ceive full value from the warranty, the
operator must maintain unit as instruct-
ed in this manual. Various adjustments
will need to be made periodically to
properly maintain your unit.
• Once a year, replace the spark plug,
air filter element, and check guide bar
and chain for wear. A new spark plug
and air filter element assures proper
air-fuel mixture and helps your engine
run better and last longer.
WARNING: Disconnect the spark plug
before performing maintenance except
for carburetor adjustments.
LUBRICATION
1 Bar 2 Bar Oil
Sprocket FillCap
1 Use sprocket lubrication
2 Use Craftsman chain saw bar oil
11
Loading ...
Loading ...
Loading ...