Loading ...
Loading ...
Loading ...
orwoodintothecutuntilthe saw can be
removed easily. Restartsaw and carefully
reenter the cut. Do not use a metal
wedge. Do not attemptto restartyour
saw when it is pinchedor hung ina log.
Use a wedge to remove pinched saw
Turn saw OFF and use a plastic or
wooden wedge to force cut open.
Overcutting begins on the top side of
the log with the bottom of the saw
against the log. When overcuffing use
lightdownward pressure.
Overcutting Undercutting
Undercutting involves cutting onthe
underside of the logwith top of saw
against the log. When undercutting use
lightupward pressure. Hold saw firmly
and maintain control. The saw will tend
to push back toward you.
WARNING: Never turn saw upside
down to undercut, The saw cannot be
controlled in this position.
L_,;_ ,_log
for support _ 2nd Cut,,_
_st Cut
I stCut
2nd Cut _
BUCKING USING A LOG OR
SUPPORT STAND
• Remember your first cut is always on
the compression side of the log. (Re-
fer to the illustrationbelow for your
first and second cut).
• Your first cut should extend 1/3 of the
diameter of the log,
• Finishwith your second cut.
Using/_ ndCut
_
_Y/:x'''"_/_" "" 1stCut
Always make your first cut on the
compression side of the log,
First cut on compassion side of log
Second cut
#
Firstcut on compression slde of log
BUCKING WITHOUT A SUPPORT
• Overcut through 1/3 ofthe diameter of
the log.
• Roll the log over and finish with a sec-
ond overcut.
• Watch for logs with a compresion
side. See illustration above for cutting
logs with a compression side.
2nd(
LIMBING AND PRUNING
WARNING: Never climb intoa tree to
limb or prune, Do not stand on ladders,
platforms, a log, or in any position
which can cause you to lose your bal-
ance or control ofthe saw.
IMPORTANT POINTS
• Watch out for springpoles.
Springpoles are small size limbs
which can whip toward you, or pull
you off balance, Use extreme caution
when cuffing small size limbs.
• Be alert for springback, Watch out for
branches that are bent or under pres-
sure. Avoid being struck by the
branch or the saw when the tension in
the wood fibers is released.
• Frequently clear branches out of the
way to avoid tripping over them.
10
Loading ...
Loading ...
Loading ...