Loading ...
Loading ...
Loading ...
Electronic
ignitors
NOTE: Keep the ignitor, ignitor cap and burner
ports clean.
If a burner does not ignite, listen for the
clicking sound. If the ignitor is not clicking,
turn off the burnm: Check the circuit breaker
for a blown fuse or a tripped circuit breakm:
If the ignitor still fails to operate, check the
Problem Solver in the back of tbis manual or
the Power Failure information in this section.
NOTE: If you are using propane gas, a slight pop
or flash may occur at the burner ports a few
seconds after the burner has been turned off
This "extinction pop" is normal for propane gas.
Ignitor
Burner base
)
Simmering Your new profbssional gas range has
exceptionally low simmering capabilities. The
center simmer cap serves as a heat diffuser to
spread out the heat to avoid having a center hot
spot. Keep in mind tbat because of the high
heat capacity of the outer burnm; and the mass
of the cast iron burner grates (they retain heat
longer tban lighter, conventional grates), some
foods may continue to cook by retained heal
after tbe burner has been turned off.
The simmer burner is lit from the outside
burner flame.
The flame travels tbrough tbe simmer ignition
channels and crosses over onto tbe simmer
burner located just beneatb the simmer cap.
When lighting only the simmer burnm; always
light the main burner first. This will in turn
provide the ignition source fbr tbe simmer
burner. Ensure that tbe simmer ports are lit
before turning tim control knob down to tim
simmer position. Should a strong draft or
boilover extinguish the simmer flame, it will not
relight automatically as the outer burner would.
B_rner
efficiency
and jlame
characteristics
The burner flame should burn completely
around and witbin tim burner Mth no excessive
noise or lifting. The flame should be blue in
color and stable witb no yellow tips.
An improper air-gas mixture may cause eitber
a burner flutter or a yellow-tipped flame.
A technician should adjust tim flame.
During initial use, fbreigm particles in tim gas
line, or dust in the air or around tim appliance
may cause an orange flame. This will disappear
widl ElSe.
11
Loading ...
Loading ...
Loading ...