Loading ...
Loading ...
Loading ...
Surface Cooking
Stainless Steel Range
Control
knobs
The control knobs are in front of tile burnm;
grille or griddle tbey control. The oven and
griddle controls are placed slightly lower than the
surface burner control knobs.
The surface burners have an infinite number of
heat settings as there are no fixed positions
between HI and LO.
To turn ON a surface burnm; push tile control
in, then turn it counterclockwdse to the LITE
position.
Check to be sure the burner you turned on is tile
one you want to use.
You will heal" tile ignitor click. When tile gas is
ignited all around the burner and into tile
central simmer burner below tile simmer cap,
turn tile knob back to the desired setting.
When using tile simmer burnm; always ensure
that it lights from tim main burnen
Pushthecontrolinandturnitcounterclockwise
totheLifEposition.
Burners
Your new professional gas range is equipped
with burners typical of those used in restaurants.
These burners are designed in two pieces tbr
easy cleaning and control.
The center, smaller cap covers and protects the
simmer burner from boilovers tbat could put the
flame out. This cap also spreads the simmer
burner heat out to avoid too much heat being
concentrated on the center of tim pan.
The simmer burner is always on when the burner
is in use. The burner should never be operated
if tim simmer cap is not in place.
The outer cap/port ring constitute tim main
burner and are in operation between the HI
and LO settings.
The burners have electronic spark ignition to
eliminate continuously burning pilots. When the
outer cap/port ring is on and tim flame is blown
out, it will relight. The burners are rated at
15,000 BTU around tim outer cap/port ring.
When turned to the simmer setting, only the
center of tim burner is lit, and it is rated at
500 BTU.
Simmer burner
\
Simmercap
Outer cap/port ring
10
Loading ...
Loading ...
Loading ...