Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
35
Fit the new PFS unit to the cooker and replace the leads.
Refer to the wiring diagram and reassemble in the
reverse order. Check the performance.
5.6 To Change the Oven Solenoids
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Move the cooker forward to gain access to the rear. See
‘Moving Your Cooker’ in the installation section.
Remove the screws securing the cover and lift clear.
Disconnect the solenoid leads and remove the earth
lead from the earth screw. Unclip the wires from the
cable ties.
Disconnect the pipe tube nuts to the solenoid unit.
Unscrew the locking nut from the end connector and
the remove solenoid unit. Fit the new unit to mounting
bracket and x in place with locking nut. Ret the tube
nut connections.
Replace the leads (refer to the wiring diagram). Replace
the wires in cable ties. Check the appliance is gas sound.
Ret the cover box. Check for the correct operation of
the solenoids.
5.7 To Change an Oven Electrode
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the oven burner (see 5.2). Remove the screw
and nut securing the electrode to the burner. Pull the
lead from back of electrode and t to the new electrode.
Fit the new electrode to the burner.
Reassemble in reverse order. Check the ignition.
6 Doors
6.1 To Remove the Grill Door
Remove the left-hand side panel (see 1.2). Remove
the plinth (4 screws) and the central vertical cover
(5screws). Remove the 2 countersunk screws (1 each
side) securing the grill hinge arms to the front of the
grill chamber.
Note: The arms are spring tensioned. Carefully remove
the grill door. Retain the gaskets.
Reassemble in reverse order, making sure that the
gasket is tted between the hinge arm and the front of
the grill chamber.
6.2 To Replace an Oven Door
Open the oven door. Support the door and loosen the
2 screws securing the upper hinge and gasket to the
cooker front (Fig.9-9).
The door is heavy, so take care.
Support the door and remove the screw nearest the
hinge pin (Fig.9-10). Swing the hinge up and away from
the door hinge pin. Lift the door away from the lower
hinge and remove.
Reassemble in reverse order.
ArtNo.320-0001 Door hinges
1
ArtNo.320-0001 Door hinges
2
Fig.9-9 Fig.9-10
Loading ...
Loading ...
Loading ...