Loading ...
Loading ...
Loading ...
www.SCEPTRE.com
SCEPTRE E24 Display User Manual
If You have VGA Connec on on Your Video Card…
1. Make sure the power of E24 LED MONITOR is turned off.
2. If you were previously using a CRT (bulky) monitor, please hook up your old monitor
first and make sure your refresh rate is set to 60 Hz frequency before using the E24 LED
MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING
on the desktop with nothing selected. After you have right clicked, select the DISPLAY
SETTINGS option. Scroll to the bottom of the page and click on the DISPLAY ADAPTER
PROPERTIES. Click on the MONITOR tab. In that tab, change the refresh rate to 60 Hz
and click on APPLY. After the refresh rate changed, please shut down the computer and
monitor.
3. Obtain the VGA cable and connect to the VGA connection on your PC. Connect the other
end of the cable to your E24 LED MONITOR.
4. Obtain a 3.5mm mini-jack cable connect it between the computer’s audio out and the
monitor’s audio in.
5. Turn on the power of both the E24 LED MONITOR and the PC.
Please Note:
• The PC’s clearest picture is ran with 1920 x1080 at 60 Hz.
- 17 -
Loading ...
Loading ...
Loading ...