Loading ...
Loading ...
Loading ...
English
4
IN-WALL SPEAKER - CENTER CHANNEL PLACEMENT
The SCL-6 or SCL-7 may be oriented either vertically or horizontally when used as a center channel speaker. If the speaker is being used with a
perforated projection screen, it should be mounted behind the center of the screen with the horizontal center axis aligned as close as possible to the
center axis of the Left and Right channel speakers (Figure 3).
Center Axis
Figure 3
NOTE: Some perforated projection screens have a batten bar or crossbar centered across the screen frame (Figure 4). In such cases make sure
the bar does not block the horn. Position vertically oriented speakers so that the bar crosses in front of the speakers at the edge of the horn closest
to the central woofer.
×
√
Batten bar or crossbar
Figure 4
If a non-perforated projection screen, LCD/plasma/OLED display is being used in the installation, the SCL-6 or SCL-7 may be used in horizontal
orientation mounted directly below or above and as close as possible to the video display (Figure 5).
NOTE: It is extremely important to place the center, left and right speakers as close as possible to the same height. The horn in the center channel
speaker should be no more than 2 feet (61cm) higher or lower than those in the left and right speakers. This preserves the localization integrity of
"sound pans" in which the sound appears to move from left to center to right.
Loading ...
Loading ...
Loading ...