Loading ...
Loading ...
Loading ...
installation
4_If AURCONDITIONER is Blocked _ Storm
Window FRAME
, If storm win_w presents interference, fasten a
2'°wide wood strip to the inner window sill across
the full wi_ of the sill The _d strip should be
thick eno,_h to raise the height of the window silU
so that the unit _n _ installed without
intederence from the the storm window frame,.
Be FIG, 9,
T@,of wood strip,should be approximately 374"
higher than the storm window frame to help
condensation to drain proper_ to, the o_side,
• install a se_nd wood _ip, (appiroximate_:/6"
bng by 11/2" wide and same thickness as first
strip) in the center of the outer sill flush against
the back of the inner sill
CAUTION:
• Air ,_nditioners cove#ed in this manuali pose an
excessive weight hazard Two or more people
are. needed to move and install the unit.
To prevent injury or slrain, use pro_r Hfling and
carrying techniques when moving unit.
° When handling the air conditioner, _ ,_reful to
avoid c_s from sharp meta_fins on front and
rear _ils,
• Make sure air _nditioner d_ no_fail during
removal
WOOD STR!P
1 1_" mir'_, 3/4°',(19mm)
W_n storm win,d_
flame is Io_ted on outer si_
FIG, 9
REMOVAL FROM WINDOW
, Turn off and unplug the air c_ditioner.
, Unsc{ew the side screws that you insta!_edin
Step 2(Page 13).
, Cio_ the curtain frame and remove foam s_l and
L bracke from the windows.
• K_p a firm grip on the air conditioner and raise the
sash,
• LA the air conditioner from the window.
• Remove the foam strip from between the window.
• Remove the sup_rt bracket from windowframe,
• Race unit and m_Jnting hardware in air c®ditio, ner
shipping carton, and store in clean, dry phi.
14 Room Air Co_,ditioner
Loading ...
Loading ...
Loading ...