Loading ...
Loading ...
Loading ...
installation
ITEM A: 1EA !TEM B: 1EA ITEM C::1EA iTEM D: 2EA ITEM E: 7EA
SUPPORT,BRACKET LEVEUNG BOLT LEVELINGBO,LT SCREW:_8" SCREW:5/8"
I]EM P: lEA HEM G: lEA IIEM H: lEA I_EM J: lEA I]EM K: lEA
FOAMSEAL FOAM STRIP L BRACKET SDE BRACKET DRAINPIPE
Have the following tools available for installation:
* Tight: Fi_ing gloves • S,_rp knife
* Standard screwdriver * 3/8-inch open ,end wrench or
*,Phillips _rewddver adjustable wrench
, Plie_ * 1/4-inch hex socket and ratchet
, Tape measure
, Eledric drill
,1/4oinch drill b_
Your air conditioner will ins.tall into s_ndard
double hung windows with a_ual dear
o_ning wid_s of 27.6 to 41.5 inches (700ram
to 1054mm)..
Lower _sh must o_n s_icientl!y to allow ia
clear ve_ical o_ning d 15. ! inches (383mm).
Side louvers and the rear d the air conditioner
must have clear air space to allow enough
airflow through _e condenser for heat
removal, The rear d the unit must
outd_rs, not inside a building or garage,
!&1 °min_ Inner sill
Interior wa_{
Sash
Sill
Exterior
WARNING: This product is, a WINDOW AIR CONDITIONER.
As such, a standard single-hung or double-hung window is required
for p.r.o_r installation. Non-window installations,, including using
sleeves, holes in wails,, and other installations are not recommendS,
Owner_ Manual 1i
Loading ...
Loading ...
Loading ...