Loading ...
Loading ...
Loading ...
25
5. Insert the alarm signal wires through the hole in the rear panel and then through the hole in
the control box.
Recommended wire size: 16 AWG - 22 AWG
EXTERNAL ALARM DEVICE CONNECTION
Hole in the Rear Panel
Route of Signal Wires
Terminal Block
Hole in the Control Box
OS-1
OS-2
FA-2
FA-1
AL-1
AL-2
Alarm Device 1
Alarm Device 2
Terminal Block
6. Connect the alarm signal wires to terminal AL-1 and AL-2 and/or FA-1 and FA-2 as shown
in the figure.
7. Reinstall the panels.
Loading ...
Loading ...
Loading ...