Loading ...
Loading ...
Loading ...
Oven Door
Leveling Legs
Do net p!ace excessive weight on or stand on an open
oven door. This Could cause the range to tip over, break
the d00rl or injure the user.
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and wiii decrease with use.
Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
Storage Drawer
Do not store plastic, paper products, food or f!ammable
for these items when the oven is in use.
The storage drawer can be removed to allow you to clean
under the range.
To remove:
1. Empty drawer and pull out to the first stop position.
2. Lift up the front of the drawer.
3. Pull out to the second stop position.
4. Grasp sides and lift drawer up and out.
To replace:
1. Fit the ends of the drawer glides into the rafts in the range.
2. Lift up the front of the drawer and gently push in to the
first stop position.
3. Lift drawer up again and push until drawer is closed.
Be sure the antbtip bracket secures one of the
rear leve!ing legs to the floor, This b[acket pEe:
vents the range from accidentally tipping. J 1
The range should be leveled when installed. If _ _,,)/
the range is not level, turn the plastic _ _:-"J
leveling legs, located at each corner of _r_--.£- /
the range, until range is level £tTAOI_ET
\ LEVELIIVG LEG
Oven Light
' Disconnect power to rang e be[0re rep!acing light bulb.
' Allow oven to Cool before replacing light buib.
-Make sure bulb cover and bulb are cool before touching.
To assure the proper replacement bulb is used, order bulb from
Amana. Call 1-877-232-6771 USA and 1-800-688-8408 Canada
and ask for part number 74004458 - halogen bulb.
To Replace Oven Light Bulb:
Disconnect power to the range.
When oven is cool, use fingertips to grasp edge of bulb cover.
Pull out and remove.
1.
2.
3.
4.
5.
6.
Carefully remove old bulb by pulling straight out of ceramic
base.
To avoid damaging or decreasing the life of the new bulb, do
not touch the bulb with bare hands or fingers. Hold with a
cloth or paper towel Push new bulb prongs straight into
small hobs of ceramic base.
Replace bulb cover by snapping into place.
Reconnect power to range. Reset clock.
20
Loading ...
Loading ...
Loading ...