Loading ...
Loading ...
Loading ...
First, remove the two screws and lock washers attached to the sideburner valve bracket. Position
sideburner valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center
hole in fascia. Align the holes on valve bracket with left and right holes on fascia. Attach using lock
washers and screws that were removed from bracket.
Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with
upper and lower holes on fascia, so that valve stem is centered in the large hole. Attach using two
#8-32x3/8" screws and 4mm lock washers. Press sideburner control knob onto valve stem.
Note: Use left and right
haJes an fascia to
attach vaJve bracket
Screws and Washers
removed from valve bracket
Valve stem
valve bracket
#8-32x3/8" screw _ 4mm lock washer
Qty.2 _ Qty.2
Control knob
\
Note:Useupper and lower
holes onfascia to
attachbezel
bezel
Insert sideburner tube through hole in bottom of sideburner shelf. The stud on bottom of burner fits into
small hole at rear of sideburner drip pan, shown A.
Under sideburner shelf, secure burner to sideburner drip pan with one Wing nut. Untie sideburner ignitor
wire which was tied to metal hose. Attach this wire to electrode. Make sure burner tube engages
sideburner valve, shown B.
Wing nut
Qty.1
sideburner
24 ° 464224411
Loading ...
Loading ...
Loading ...