Loading ...
Setting Oven Controls
Note: The time of day must first be setin Order to operate the oven:
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash
"12:00".
,
once (do not hold pad down).
2. Within 5 seconds, press and hold the or until the correct time of day appears in the display.
Note: The clock cannot be changed during any timed bake or Self-Clean cycle.
To Set the Minute Timer:
1. Press _.
2. Press the increase the time in one minute increments. Press and hold the to increase the time in 10 minute
increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If the U pad is pressed first, the timer will advance to 11 hours and 59 minutes.
3. The display shows the timer countdown in minutes until 1 minute remains. Then the display will countdown in
seconds.
4. When the set time has run out, the timer will beep 3 times. It will then continue to beep 3 times every 60 seconds until
_is pressed,
Note: The indicator light located above the (_ pad will glow while the minute timer is active.
Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set
time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is
in use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that
function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the or
To Cancel the Minute Timer before the set time has run out: Press _.
to increase or decrease the time.
Note: Toturn the time of day display OFF or ON inthe di., Jhold for 15 seconds (the contro! w!ll beep
once) and then release. This feature does not remove the set time of day from the memory of the control When the
display is turned OFF the time of day will reap_
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory.The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press _." "a _ears in the display.
2. Press and hold the until "HI" appears in the display.
,
4.
5.
Press and hold until °F or °C appears in the display.
Press the _t or _! to change °F to °C or °C to °F.
Press any control pad to return to normal operating mode.
Loading ...
Loading ...
Loading ...