Loading ...
Loading ...
Loading ...
Max Ice
When activated, Max Ice reduces the freezer temperature to the optimum setting for 24 hours in
order to produce more ice. Note: When the Max Ice feature is in operation, the UP and DOWN
pads for the freezer control will not operate.
Water Filter Indicator
When a water filter has been installed in the refrigerator, the yellow Order light will illuminate
when 90 percent of the volume of water for which the filter is rated has passed through the filter.
The red Replace light will illuminate when the rated volume of water has passed through the fil-
ter. A new filter should be installed immediately when the Replace light is illuminated. After re-
placing the filter, press and hold the WaterFilter Indicator button for three seconds. The Order
and Replace lights will go off.
Vacation Mode (some models)
The Vacation Mode feature causes the freezer to defrost less frequently, conserving energy. The
Vacation Mode indicator light will illuminate when the feature is activated. To deactivate, press
the Vacation Mode pad again OR open either door. The indicator light will go out. NOTE: Door
openings will not deactivate the Vacation Mode for approximately one hour after activation. If
vacationing for more than a few days, see the Preparing for Vacation section, page 27.
High Temp Alarm
The High Temp Alarm system will alert you if the freezer or refrigerator temperatures exceed nor-
mal operating temperatures due to a power outage or other event. When activated, the High
Temp Alarm light will illuminate. If the freezer or refrigerator temperatures have exceeded these
limits, the display will alternately show the current compartment temperatures and the highest
compartment temperatures reached when the power was out. An audible alarm will sound re-
peatedly. Press the High Temp Alarm pad once to stop the audible alarm. The High Temp Alarm
light will continue to flash and the temperatures will alternate until the temperatures have stabi-
lized. To turn off High Temp Alarm, press and hold the High Temp Alarm pad for three seconds.
The indicator light will go off.
Moisture Control (on some models)
The moisture control feature turns on a heater to help reduce moisture on the door hinge seal.
Use in humid environments or when you notice moisture on the door hinge seal. The refrigerator
uses more energy when moisture control is ON. Press Moisture Control to turn the door heater
ON. Press Moisture Control again to turn the heater OFF. The LED will be illuminated when
Moisture Control is ON.
Door Open Alarm
The Door Open Alarm will alert you when one of the doors has been left open for five continu-
ous minutes. When this happens, an audible alarm will sound every few seconds until the door is
closed OR press the Door Open Alarm pad to deactivate the feature.
Max Cold
When activated, Max Cold causes the refrigerator and freezer temperatures to drop to the mini-
mum settings on the control. This cools down the refrigerator and freezer after extended door
openings or when loading the refrigerator or freezer with warm food. NOTE: When the Max
Cold feature is in operation, the UP and DOWN pads for the refrigerator and freezer controls will
not operate.
To activate, press the Max Cold pad. Max Cold will deactivate automatically after 12 hours, OR
press the Max Cold pad to deactivate the feature.
User Preferences
Access the User Preferences menu to:
• Change the temperature display from °F to °C
• Enable or disable audible alarms
• Activate the Sabbath Mode
To access the User Preferences menu, press and hold the Door Open Alarm pad for three sec-
onds. When in the User Preferences mode, a short title for the feature will appear in the Freezer
temperature display and the feature status will appear in the Refrigerator display.
1. Use the freezer UP and DOWN control to scroll through the features.
2. When the desired feature is displayed, use the refrigerator UP and DOWN control to change
the status.
3. When changes are complete, press the Door Open Alarm pad for three seconds OR close the
refrigerator door.
Temperature Display (F_C)
Change the display to show temperatures in degrees Fahrenheit or degrees Celsius.
Alarm (AL)
When the Alarm mode is OFF, all audible alarms will be disabled until the feature is turned on.
Sabbath Mode (SAB)
When the Sabbath Mode is ON, all control lights will be disabled until the feature is turned OFF.
This feature does not disable the interior lights. Press any pad to restore the control lights.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occur-
rence that helps prevent moisture from condensing on the cabinet. This condition will be more
noticeable when the refrigerator is first started, during hot weather and after excessive or lengthy
door openings.
9
8
Temperature Controls Temperature Controls
Loading ...
Loading ...
Loading ...