Loading ...
Loading ...
Loading ...
KNOWYOURSAW
READTHISINSTRUCTIONMANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with
the location of the various controls and adjustments. Save this manual for future
reference.
Front Hand Guard Front Handle
,_
Starter Rope
ON/STOP
Chain
Mufti
Throttle
Lockout
Rear
Handle
Bar Oil Fill Cap
Cylinder Cover
Fastldle _
Lock
Starter Housing Fuel Mix Fill Cap
r_ Chain
Direction
of Travel
Guide Ba
Choke Knob
Brake Chain Adjustment Knob
ON/S'rOP SWITCH
The ON/STOP SWITCH is used to stop
the engine.
THRO'n'LE TRIGGER
The THROTrLE TRIGGER controls engine
speed.
THROTTLE LOCKOUT
The THROrrLE LOCKOUT must be
pressed before you can squeeze the
throttle tngger. This feature prevents you
from accidentally squeezing the trigger.
FAST IDLE LOCK
The FAST IDLE LOCK holds the throttle
trigger in the starting position. Activate
the fast idle lock by pressing the throttle
lockout and squeezing the throttle trig-
ger. With the throttle trigger squeezed,
press the fast idle lock. Release the
throttle lockout and tdgger while holding
the fast idle lock button.
CHOKE KNOB
The CHOKE KNOB activates the choke to
provide additional fuel to the engine dur-
ing cold starting.
PRIMER BULB
The PRIMER BULB circulates fuel to the
carburetor to provide quicker starting.
CHAIN BRAKE
The CHAIN BRAKE is a device designed
to stop the chain if kickback occurs.
The chain brake activates automatically
in the event of kickback. The chain
brake activates manually if the front
hand guard is pushed forward. The
chain brake is disengaged by pulling the
front hand guard back toward the front
handle as far as possible.
CHAIN TENSION
It is normal for a new chain to stretch
during first 15 minutes of operation. You
should check your chain tension fre-
quenUy. See CHAIN TENSION under the
SERVICE AND ADJUSTMENTS section.
7
Loading ...
Loading ...
Loading ...