Loading ...
Signal Input Terminal
Receiver module body
Power Input Connector
Antenna
1.
Location of outlook
2.
Sensor runs out of battery
3.
Setting Advanced - Learning mode
4.
Precautions
A. Due to rubber valve stem aging under high temperature and expose under the sun, which may cause crack
on the rubber stem, therefore, we recommended metal type of valve stem.
B. Please double confirm if sensors are fitted tightly. If necessary, please spray soapy water on the valve stem
to check any air leakage.
C. If tire pressure is getting down or dropping quickly, please stop car immediately to find out if tire is deflated
or another problem is happening.
D. Please make sure if your sensor has mixed with other systems. As each sensor has its unique identified
number and monitor can only receive pre-loaded identified number and cannot accept other new identified
number.
E. The external sensor battery is lithium battery CR1632, please select the correct model. Lithium battery
caution:
(1) Do not clip with metal object.
(2) Can not swallow, recharge or throw into fire.
F. Please do not operate this device while you’re driving.
5.
Trouble Shooting
A. Indications disappear from / do not appear in the MiVUE display
(1) There is a certain limit transmitting range between sensor and module. Please
confirm if the sensor is within the receiving range.
(2) Be sure to observe the correct polarity when installing the batteries.
(
3) When the sensor battery is out of power, under long period of usage. It
is recommended to replace new battery for external type sensor.
(4) Reinstall the sensor battery. After removing the sensor battery, conduct discharge
process to the sensors, this purpose is to reset the sensor.
(5) Please make sure if your sensor has mixed with other systems’. As each sensor has
its unique identified number and monitor can only receive pre-loaded identified
number and cannot accept other new identified number.
(6) The receiver module is recommended to install on an open space such as a
windshield to get the best signal reception.
B. Receiving module without signal
Receiving module needs to be used with MiVUE DVR.
C. Many environmental factors cause tire pressure rise and drop as well. For example, hot
weather or warm tire will lead rising tire pressure.
D. Sensor temperature difference
Running engine, exposure under the sun, constant braking or near high temperature
and other factors, can easily make sensor heat conditions inconsistent and cause the
difference in temperature measurement.
(Please ensure you set your temperature pressure limit to factor in for changes from
cold to hot temperature. If you are unsure of your tyre's cold and hot temperature
pressure recommendations, please check your vehicles user manual.)
E. If these solutions do not help improve the situation, consult your nearest dealer.
Receiver Module Description
Receiver Module
Receiver
Sensor body
User guide
Hex key
Air valve nozzle
accessories
Hex socket
cap screws
Disc-shaped washer
※Specifications are correct at time of publication. Subject to change without notice.
7.
Product Package Content - External
Anti-theft tool
Spanner
Anti-theft fixed ring
Hex socket screw
1 piece
User guide
Items Content Quantity
Tire pressure sensor
CR1632
lithium battery
4 pieces
4 pieces
4 pieces
4 pieces
1 piece
1 piece
8.
Product Package Content - internal
Items
Content Quantity
1 piece
1 piece
4 pieces
4 pieces
4 pieces
4 pieces
1 piece
The sensor is an electronic detector powered by a lithium battery. If there is insufficient power in the sensor, the
sensor will send back insufficient power code to the receiver module. If the power is insufficient, the external
sensor recommends to replace the lithium battery to ensure the normal operation of the system to update the
correct tire information.
This feature is mainly supplied to the solution when the sensor is missing. Because the monitor can only identify
the same ID group of sensors, other sensors can’t be read, then just order a new sensor and
re-learning the new sensor.
A. First, install the sensor on the tire.
B. The receiver module is connected to the DVR power is remained and the DVR is with power on.
C. Switch the DVR to "learning mode setting" which will enter the receiving mode for new sensor signal.
D. Under the learning mode if the sensor signal input, you can re-identify the new sensor. The recommended
practice is to reinstall the sensor battery to ensure that the signal is sent immediately.
E. After learning, the DVR inputs "confirm" command to the receiving module to exit from the receiving mode.
External Sensor
433.92MHz 3Volts DC
433.92MHz 5Volts ~ 12Volts DC
-20℃ ~ 80℃
433.92MHz
0 ~ 60PSI
-40℃ ~ 125℃
43°
30m
6.
Product Specification
Diameter 20.8mm x Height 22.7mm
13g (±1)
-40℃ ~ 125℃
Pressure range
Pressure accuracy ±1PSI
0 ~ 60PSI
±2℃
Temperature
accuracy
Dimensions
Weight
Operating
temperature
Operating voltage
Angle adjustable
valve stem
36.9g (±1)
Frequency
Pressure range
Pressure accuracy ±1PSI
±2℃
Temperature
accuracy
Dimensions
Weight
Operating
temperature
Length 60.4mm × Width 27.6mm ×
Height 11.7mm
Internal Sensor
Frequency
Frequency
Operating
temperature
Operating voltage
Dimensions
Length 45mm × Width 40.8mm ×
Height 11.5mm
Weight 13.5g (±1)
Receiver Module
Effective
receiving distance