Loading ...
Loading ...
Loading ...
Operation of electronic models (model GSD4000 Only)
Using the Dishwasher Door
_mhe door must be closed and locked into place to select a LOAD SELECTION or an OPTION.
Ifthe door isopened during a cycle and left open, the dishwasherwilt beeponce every 30 secondsuntil the
door is closedand latched into place.
Start
Close and latch the door. Touch the START/RESETpad to begin the cycle. Water fill begins and
approximately 60 seconds later the wash action begins.
NOTE: The dishwasher remembers your last cycle so you don't have to reprogram each time. When
the dishwasher is loaded and the door latch is in the locked position, the control panel lights will be ON
and display the last settings you selected.
If you don't want to change any of the settings, simply touch the START/RESETpad to begin
the cycle.
Also, if a power failure occurs, NORMAL and HEATEDDRYwill automatically be programmed.
Make any new selections and touch the START/RESETpad to begin the cycle.
Clean
This light is illuminated when a wash cycle is complete. The light will stay ON until the door is opened.
Flushing Display Lights
Lights What It Means
What To Do
This is normal.
The START/RESETpad
has been pressed.
Allow the dishwasher to drain and reset before you start a new
wash cycle.
CLEAN
PLUS A
BEEPING
ii¸¸¸¸¸I (
WA_
(i_ii_i_ ;__)
PLUS A
BEEPING
SOUND
Control Error
Pressthe START/RESETpod to turn off the beeper. If the CLEAN
light continues to flash, call for service.
Control Error
Pressthe START/RESETpad to turn off the beeper and the
dishwasher will attempt to reset. Restart the wash cycle.
If this error continues, turn off the power to the dishwasher at
the circuit breaker for 30 seconds. Try the dishwasher again.
If the error isstill present, call for service.
10
Loading ...
Loading ...
Loading ...