Loading ...
Loading ...
Loading ...
10
FAULT FINDING
PROBLEM SOLUTION
Engine will not start
Check there is ample clean, fresh fuel in the tank. Any stale fuel needs to be drained
from the machine.
Check the cutter blade is not fouling the ground preventing free rotation.
Engine will not stop
Check the Operator Presence Control (OPC) lever is fully released.
Remove spark plug lead to stop the engine using insulated gloves and refer to an
authorised Mounteld dealer.
Engine smokes Engine may be overlled with oil or may have been tipped.
Engine running unevenly
Check the petrol ller cap isn’t too tight - it should only be nger tight. If fuel is over 28
days old it has gone stale and will need replacing.
Failure to cut grass
properly
Stop the engine and disconnect the spark plug lead using heat resistant gloves.
Check the blade attachment bolt is tight.
Check condition of the blade.If seriously worn or damaged replace with a new one.
Failure to collect grass
properly
Stop the engine and disconnect the spark plug lead using heat resistant gloves
Check and make sure there is no build up of grass inside the casing.
Check grass collector is allowing air to ow through the fabric. If it is clogged
it should be washed carefully.
If the grass collector is not clogged raise the height of cut to increase airow.
Check to ensure the engine is running at the correct speed (approximately 3,000rpm)
If conditions are too severe to use the grass collector, remove it and work with the
deector in position
Machine vibrates
excessively
This will certainly indicate that the blade has become badly damaged. Stop the engine,
disconnect the spark plug lead and examine the blade assembly. Refer to your local
authorised Mounteld dealer.
HELPLINE
0800 121 6585
1800 806 149 ROI
or visit
www.servicelink.org.uk
This product is supported by Service
Link. If you have been unable to find the
information you require above please
call the Service Link helpline. Here you
will find 1-2-1 help and advice from
garden machinery repair specialists.
Service link
>
What is Service Link? Service Link is an aftersales help
and
advice helpline with a national network of garden
machinery
repair specialists.
>
How can we help you? Here at Service Link we can help with
all your trouble shooting, warranty, parts and service needs.
Call us and speak to one of our advisors and if required, visit
one
of our 450 centres across the UK and Ireland.
>
How can you contact us? If in the unlikely event that this
product does require our help, please visit the Service Link
website at www.servicelink.org.uk or alternatively contact
the helpline on 0800 121 6585 in the UK or 1800 806 149 in ROI.
Loading ...
Loading ...