Loading ...
Loading ...
Loading ...
6
Temperature Adjustment
Use the thermostat to select the ideal storage temperature.
This product could be used both as freezer and as cooler.
• To use the product as freezer set thermostat in position
“freezer”. In this case the product must be used to store
frozen food, to freeze fresh food and to make ice.
Internal temperature could be set between -14°C and
-22°C (depending on the environmental conditions, this
range may vary slightly)
• To use the product as cooler set thermostat in position
“cooler”. In this case the product must be used to store fresh
food and beverages.
Internal temperature could be set between 0°C and
+6°C (depending on the environmental conditions, this
range may vary slightly)
• To turn o the product set thermostat in OFF position.
In this case the product is already connected to power
supply.
COOLER USE
Before switching from freezer use to cooler use please:
1. check that frozen food is not present inside the cavity to
avoid unwanted food defrosting.
2. defrost and clean the product to avoid water stagnation on
the bottom.
Note: In the case of high levels of humidity, it is possible that
inside the appliance condensation may form on both the walls
and the bottom of the compartment. This is absolutely natural
and does not jeopardise the operation of the appliance in any
way.
In this case, we recommend closing any liquid- lled containers
(e.g.: sauce pans full of stock), wrapping foods with a high
liquid content (e.g.: vegetables).
IMPORTANT: when using the product as a cooler please
check that the fast freeze function is not activated in order
to avoid bottle cracking.
IMPORTANT: when using the product as a cooler please
check that the fast freeze function is not activated in order
to avoid bottle cracking.
WHEN THE APPLIANCE IS NOT IN USE
Disconnect the appliance from the mains power supply, then
empty, defrost (if necessary) and clean it. Leave the door
open, so that air can circulate inside the compartments. This
will prevent the formation of mould and bad odours and an
oxidation (blackening) of internal walls.
Loading ...
Loading ...
Loading ...