Loading ...
Loading ...
Loading ...
60 maintenance and cleaning
Replacing door glass panels
•Assemble the silicone spacers to the upper corners of
one of the clear glass panels. Position the panel into
the lower position of the door, ensuring the chamfered
corner of the panel is placed in the correct location as
shown in the image below.
• Insert the remaining smaller clear glass panel into the
middle position, ensuring the chamfered corner of the
panel is placed in the correct location as shown in the
image below.
• Insert the black bordered glass panel into the upper
position, ensuring the painted surface is facing the
downside as per the image below.
CLEANING THE QUAD GLAZED DOOR
Replacing the top door trim
•Hold the top door trim at each side and position it to
the inside edge of the glass.
•Push the trim down with its top edge over the glass
panel until the clip snap in on each side of the trim.
•Push the middle of the trim down to ensure it is
straight and firm against the glass panel.
Fitting the oven door
•Take hold of the oven door with a hand on each side
and with the door at an angle of 30˚, position the
recesses at the bottom of the door onto the hinge
arms of the oven. Let the door slide down the hinge
arms as far as it will go.
• Open the door fully to access the hinges.
•Rotate the ‘stirrups’ (see the image below) until they
lock into the hook. The oven door may now be closed
Chamfer to be located in this corner
Chamfer to be located in this corner
Silicone
spacers
Door
column
Stirrup in
locked position
Loading ...
Loading ...
Loading ...