Loading ...
Loading ...
Loading ...
Humidifier Operations
Your: new Sears humidifier is designed to
SatiSfyi::home : humidity _requirements
through the principle of evaporation of
water in the air.
After water is added to the bottle, the fil-
ters begin to soak up the water and
become totally saturated in approximately
30 minutes. Air is drawn in from the rear of
the humidifier and through the filters by
means of circulation fans. As air passes
through the filters, moisture is absorbed
into the air and then released in the form
of vapor, No water droplets will enter the
home. All evaporation into the air takes
place in the humidifier, which means that
the residue left by evaporating water is not
passed into the home, but remains in the
filter.
ICAUTION: Use 42-14900 EPA
only
Registered Bacteriostat available
from SEARS Retail store, Under no
circumstances should you use water
treatment products designed for Rote
belt or Ultrasonic humidifiers.
Assembly .........................
Your newSears Kenmore humidifier is com-
pletely assembled for you to use. Remove
the packaging material from •inside your
humidifierand follow the instructionsof this
Location Instructions
I WARNING: For your own safety, do not !
use humidifier tfany parts are damaged |
|
or missing
!
, .............,,,,
Step i
Place humidifieron a fia_level surface in an
area Of housewhere most humidity is need-
.:ed, or one whichwould likely result in moist
air being circulated throughoutthe house,
suchas near acold air return. •
Placingthe unitievel is very important ff the
humidifieris located on carpeting.
NOTE: The t3 gallon humidifier contains
•water bottles. The weight of the bottles in
the frontof the cabinet may cause the front
i = /
Humidified Air is
Then Released
Through the Top
Dry Air Enters
Through the _]
Rear
CAUTION: To reduce the risk of injury,
fire or damage to humidifier, use only
cleaners specifically recommended
for humidifiers. Never use flammable,
combustible or poisonous materials to
clean your humidifier, To reduce the
risk of scalds and damage to humidifi-
er, never put hot water in humidifier.
owneds manual for proper usage. The
packaging material is located under the fan
assembly. Remove the packaging material
and discard.
castersto sink deeper into the carpet. Ifthis
happens, the water level wilt be higher
towards the front of the humid_er, and
lower towards the back. The water level
float (located:at the rea_of the cabinet) may
not sense _ water so the fill light will be on
and the unit will not energize; fithis hap-
pens, the unit will need tO be leveled in
order for the humidifierto be energized, tt
may be necessary to purchase leveling
coasters from your local hardware store.
The coasters should be positioned under
the front two casters ofthe humidifier.
Loading ...
Loading ...
Loading ...