Loading ...
Loading ...
Loading ...
20
Operation
English
Electronic Ignition:
1. Before lighting, check to make sure
all the control knobs are turned to
OFF position.
2. Check that the main gas tank valve is
open.
3. Push and turn the oven control knob
counterclockwise to LITE position.
(Fig. 14)
4. Continue to push and hold the oven
control knob in and rotate the ignition
button clockwise repeatedly until
burner lights. (Fig. 17)
Fig. 17
5. Continue to push and hold the oven
control knob in for 5 seconds after
pilot is lit. Release knob and verify
pilot stays lit. Repeat steps 3 and 4 if
pilot does not stay lit.
6. Rotate the oven control knob to adjust
pilot flame to desired level. The
oven pilot has been factory set and
requires no further adjustment.
To Turn Off
To extinguish the oven, push and turn
the oven control knob clockwise to OFF
position. Always turn off the gas tank
valve when refueling or traveling.
The Burner Flame
Keep your arms and face away from
being directly above the cooking area.
Flames should appear similar to the
good flame shown in diagram below.
Good
Blue
Blue
Bad
Yellow
Yellow
Holes in Burner
A good flame should be blue with a
yellow tip.
Some yellow tips on flames up to 1”
(25.4mm) in length are acceptable as
long as no carbon or soot deposits
appear.
If flames are excessively yellow and
irregular, the oil residue may not be
completely burned off, or the venturi
may be clogged or may not be properly
positioned over the orifices. Allow the
appliance to cool before repositioning
the venturi over the valve and orifices.
Loading ...
Loading ...
Loading ...