Loading ...
Loading ...
Loading ...
17
IGNITION OF THE BROIL BURNER
IMPORTANT NOTE: the fan motor cannot be used in combination with the broil
burner. A safety device switches off the fan motor when the gas oven/broil control
knob is turned on
position.
The broil burner generates the infra-red rays for broiling.
To light the broil burner operate as follow:
1) Open the oven door to the full extent.
WARNING: Risk of explosion!
The oven door must be open during this
operation.
2)
Press the oven control knob right down and turn clockwise (fig. 3.4) to the
position.
3) Check the broil burner has lit; if not, turn the knob counterclockwise back to
and
repeat the procedure from step 2.
4) Once the broil burner has lit, close the oven door slowly.
If the flame extinguishes for any reason, the safety valve will automatically shut off the
gas supply to the burner.
To re-light the burner, first turn the oven control knob to position , wait for at least
1 minute and then repeat the lighting procedure.
VERY IMPORTANT NOTE: THE BURNER IGNITION PROCEDURE MUST ALWAYS
START WITH THE CONTROL KNOB IN THE OFF POSITION OR IT WILL NOT BE
POSSIBLE TO IGNITE THE BURNER.
Do always broil with oven door closed.
Attention: the oven door becomes very hot during operation.
Keep children away.
3
Fig. 3.4
Loading ...
Loading ...
Loading ...