Water Filter Cartridge
The water filter cartridge is located on the right hand side of the ice machine Controls.
The filter cartridge should be replaced every six months when the replacement indicator light turns on or sooner if the flow of water to the
ice machine decreases.
Installing the filter Cartridge
1. Remove the water filter from the carton box.
2. Remove the cover from the water filter. Be sure the O-rings are still in place after the cover is removed.
3. Locate the water filter compartment on the right-hand side of the ice machine controls.
4. Align the alignment pin on the side of the filter with the cutout channel in the control housing and insert filter.
5. Turn filter clockwise until it locks into the housing.
NOTE: If the filter is not correctly locked into place, the ice machine will not produce ice.
If you have questions or to order additional filter cartridges, visit our Website at gewaterfilters.com, or call 1.800.626.2002.
Customers in Canada should consult the yellow pages for the nearest Mabe Canada Service Center.
About the GE IMWF Water Filter Cartridge
Chlorine taste and odor
Cover
O-Rings
Alignment Pin
Alignment
Arrow
Unlock symbol
Alignment Pin
Lock symbol
Cutout channel in
control housing
CAUTION: To reduce the risk associated with property damage due to water leakage, read and follow
instructions before installation and use of this system. Installation and use MUST comply with all state and local
plumbing codes.
WARNING: To reduce the risk associated with choking, do not allow children under 3 years of age to have
access to small parts during the installation of this product.
For the maximum benefit of your filtration system, GE recommends the use of GE branded filters only. Using GE
branded filters in GE and Hotpoint
®
refrigerators provides optimal performance and reliability. GE filters meet
industry NSF standards for safety and quality that are important for products that are filtering your water. GE has
not qualified non-GE branded filters for use in GE and Hotpoint refrigerators and there is no assurance that non-
GE branded filters meet GE’s standards for quality, performance, and reliability. Defects in non-GE filters, and any
damage resulting specifically therefrom, are not covered under product warranty.
Loading ...
Loading ...
