Loading ...
Loading ...
Loading ...
10
7. Remove the two screws fastening the DOOR STOP SPACER and the DOOR STOP to the
bottom of the refrigerator door, and move the spacer and stop to the opposite side.
8. Re-insert and completely tight the screws.
9. Install the refrigerator door onto the washer and hinge pin of the BOTTOM HINGE.
10. Align the top hinge WASHER with the HINGE HOLE in the top of the door. Then, insert the TOP
HINGE pin through the WASHER and into the HINIGE HOLE.
11. Fasten the TOP HINGE with three screws and move the remaining four screws to the opposite
side. Completely tighten the seven screws.
Removing/Replacing the Base Grille (MC6BI model)
Follow these steps if you would like to remove or replace the grille at the base of your appliance.
NOTE: You will need a Phillips head screwdriver to reverse the door swing of this unit.
1. Open the refrigerator door.
2. Remove the two SCREWS. Release and remove the base grille from the refrigerator by pushing
both TABS in toward the center.
To replace the base grille:
1. Open the refrigerator door.
2. Align both TABS into position, such that the base grille snaps into place.
3. Replace and tighten the two SCREWS.
Loading ...
Loading ...
Loading ...