Loading ...
Loading ...
Loading ...
22
en Operation
Important information concerning the
use of the whisk (Figure E):
The whisk should almost touch the bottom
of the bowl to ensure that the ingredients
are optimally mixed. If not, adjust the height
of the whisk as follows:
Remove mains plug.
Press the Release button and
move the swivel arm to
position 2.
Insert the whisk into the drive
until the whisk locks into position.
Hold whisk in place and loosen nut clock-
wise using open-ended wrench (size 8).
Set the whisk to the optimum height by
rotating the whisk:
– Turn clockwise: Raise
– Turn anti-clockwise: Lower
Press the Release button and
move the swivel arm to
position 1.
Check the height of the whisk
and, if required, correct.
When the height has been set
correctly, press Release button
and move the swivel arm to
position 2.
Hold whisk in place and tighten nut
anticlockwise using open-ended wrench
(size 8).
Working with the bowl and the tools
Fig. F:
Press the Release button and
move the swivel arm to
position 2.
Insert the bowl:
Tilt the bowl forwards and then set it
down. Turn anti-clockwise until it locks
into place.
Depending on the processing task, insert
the stirrer, whisk or kneading hook until it
locks into position.
Note:
If using the kneading hook, rotate the dough
deflector until the kneading hook can lock
into position (Fig. F-4b).
Put the ingredients to be processed into
the bowl.
Press the Release button and move the
swivel arm to position 1.
Attach the cover.
Set the rotary switch to the desired
setting.
Our recommendation:
– Professional flexi stirring whisk:
First mix at setting 1-2, then setting
3-5 as required
– Professional beating whisk:
setting 7, mix in at setting 1
– Kneading hook:
first stir in at setting 1, knead at setting 3
Adding more ingredients
Switch off the appliance with the rotary
switch.
Add more ingredients through the feed
tube in the cover.
or
Remove lid.
Press the Release button and
move the swivel arm to
position 2.
Add ingredients.
After using the appliance
Switch off the appliance with the rotary
switch.
Remove mains plug.
Remove lid.
Press the Release button and
move the swivel arm to
position 2.
Take the tool out of the drive.
Remove the bowl.
Clean all parts, see “Cleaning and
servicing”.
Continuous-feed shredder
W Risk of injury
Do not grip the sharp blades or edges of the
cutting discs. Take hold of cutting discs by
the edge only. Before attaching / removing
the continuousfeed shredder, wait until the
drive has come to a standstill and pull out
the mains plug. Do not reach into the feed
tube.
Loading ...
Loading ...
Loading ...