Dr. Infrared Heater DR-968 Portable Space Heater

Owner’s Manual - Page 4

For DR-968.

PDF File Manual, 16 pages, Read Online | Download pdf file

DR-968 photo
Loading ...
Loading ...
Loading ...
18. Make sure the plug is fully inserted into an appropriate receptacle. Be
mindful that receptacles also deteriorate due to aging and continuous use.
Check periodically for signs of overheating or deformations of the plug. If
any overheating or deformation occurs, immediately discontinue using the
heater and contact Dr. Infrared Heater Authorized Service Center.
19.CHECK YOUR HEATER CORD AND PLUG CONNECTIONS. Faulty wall
outlet connections or loose plugs can cause the outlets or plug to overheat.
During use, please check frequently to determine if your plug outlet or
faceplate is HOT! If it is hot, discontinue using the heater and/or make
certain a qualified electrician checks and replaces the faulty outlet(s).
CAUTION: This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Product Specifications
Voltage Rating
120V (60Hz)
Power Consumption
1500W
Unit Size
15.5 in. (H) X 11.0 in. (W) X 13.0 in. (D)
Unit Weight
23.5 lbs.
Special Features
LED Display When the unit is plugged in, the LED display will show the room
temperature. At ECO mode, it will display the set value 2 minutes after the
desired temperature is set.
Overheat Cut-Off Protection System –This heater includes a protection system
that cuts off the unit if it overheats for any reason.
Inlet Air Overheat Protection System This heater will automatically cut off if
the inlet air duct becomes obstructed and causes the unit to overheat.
Safety Tip-Over Switch The Dr. Infrared Heater is designed to cut off
automatically when tipped in any direction. Place the heater on a flat, smooth,
stable surface to prevent the heater from tipping over again. When returned to
a normal upright position, the heater is ready for use again. This is a safety
feature to avoid the possibility of fire should the unit be tipped accidentally.
Loading ...
Loading ...
Loading ...