Loading ...
Loading ...
Loading ...
Use
10
3.2 First use
1. Plug the appliance into an electrical
outlet.
2. The symbols on the display flash.
3. Set the time using the lever (1).
4. Set the time by moving the lever up (+) to
increase the value or down (-) to
decrease it.
5. Confirm the setting by placing the lever in
the central position and press (OK).
6. Set the minutes following the same
procedure.
7. After confirming the minutes setting, the
appliance activates the CLOCK mode.
3.3 Accessing the settings menu
The appliance allows you to personalise
some settings:
• SE01: Set the hour format
• SE02: Set the water hardness
• SE03: Enable / disable sounds
Access the settings menu by pressing the
and buttons simultaneously for 3
seconds.
Press any button to exit from the settings
menu.
When the appliance is switched
on for the first time, the default time
will be shown in the 12h format
indicating AM/PM.
To change the time format, see the
”Time format settings menu”
section.
Loading ...
Loading ...
Loading ...