Loading ...
Loading ...
Loading ...
Whenyou push the pad to change
operation modes, theunit will make
abeepsoundtoindicatethatitis
changing modes.
model. Somemodelscan becontrolledby remotecontroller. Some models haveno remote
controlfunction.See thefollowing Fig.1 of the control panel Pleaserefertothe REMOTE
CONTROLLER INSTRUCTIONS
Fig.1
Fan Pad
or Normal fan speed. Set the fan control to High for
maximum moisture removal. When the humidity has
been reduced and quiet operation is preferred, set
the fan control to Normal.
The check filter feature is a reminder to clean the
will illuminate after 250 hours
of
operation. To reset after cleaning the filter, press
Humidity Set Control Pads
TIMER Set Control Pads
Use the Up/Down pads to set the Auto
start and Auto stop time from 0.0 to 24.
Thehumiditylevelcanbesetwithinarangeof
35%RH (Relative Humidity) to85%RH (Relative
H umidi ty) in 5 % i ncreme nts.
For drier ai r, press the pad and set to a lower
percent value (%).
For damper air, press the pad and set a higher
percent value (%).
Press to initiate the Auto start and Auto stop feature,
in conjuction withthe and keypads.
Continue Pad
Press to activate the continuous dehumidifying
operation.
Power Pad
Press to turn the dehumidifier on and off.
CONTROL PADS ON THE DEHUMIDIFIER
Control pads
Filter Pad
Timer Pad
NOTE: The control panel of the unit you purchasedmay be slightly different according to its
for theremote
operation, if a remote control is included
UP/Down Pads
/
air filter for more efficient operation. The Clean
filter indicator light
the filter pad and the light will gooff.
Controls the fan speed. Press to select either High
with your appliance.
4
.
Bucket full
indicator light
Timer on/off
indicator light
2 1 3 6 7
8
5 4
Auto defrost
operation
indicator light
Loading ...
Loading ...
Loading ...