Loading ...
Loading ...
Loading ...
23
The drip collection system in this barbecue is part
of the unit’s main frame and is located below the
burners. The drip collector has slots that will allow
excess drippings to fall through during cooking, while
separating the fi rebox from the drip tray. Clean the
drip tray after each use.
The drip collector allows you to brush or scrape
residue from the barbecue’s inner liner into the drip
tray. Following the manufacturers instructions and
regular cleaning of the barbecue’s interior with oven
cleaner, will help to prevent grease fi res.
Note: When cleaning the drip tray, the drip tray
heat shield will fi rst need to be removed to
properly clean/empty the tray of its contents.
See section below.
Note: There are easy to follow lighting instructions
etched onto the top of the drip tray handle.
DRIP TRAY HEAT SHIELD
The drip tray heat shield provides protection to the
grill controls from high heat. When cleaning the drip
tray, the heat shield must be removed. To re-install,
slide the front lip of the heat shield into the front
portion of the drip tray, then orient the front and side
tabs as shown in Fig. 23-2 to properly drop in place.
Fig. 23-1 Lighting instruction plate
Lighting
instructions
Drip tray
Tab on inside
Tab on outside
A
B
Fig. 23-2 Install drip tray heat shield
DRIP TRAY
Loading ...
Loading ...
Loading ...